[EP-tech] Re: Antwort: ISI WoK plugin configuration
George Mamalakis
mamalos at eng.auth.gr
Fri Nov 6 16:52:36 GMT 2015
Hi Martin,
I checked ISI-WoK from an Institution IP and still no luck. Then I tried
your suggestion with no luck as well. The difference is that this time
the returned messages have changed to:
Test run failed: 0 item(s) found before an error caused the test run to
abort. Carefully check any warning messages before proceeding.
I am quite unsure if SOAP::ISIWoK has been correctly installed, since it
returned lot's of errors. In particular this is how I forced installed
it using cpan, because it wouldn't pass the tests (on a Debian Jessie):
# cpan -f -i SOAP::ISIWoK
Reading '/root/.cpan/Metadata'
Database was generated on Wed, 27 May 2015 15:17:02 GMT
Fetching with LWP:
http://www.cpan.org/authors/01mailrc.txt.gz
Reading '/root/.cpan/sources/authors/01mailrc.txt.gz'
............................................................................DONE
Fetching with LWP:
http://www.cpan.org/modules/02packages.details.txt.gz
Reading '/root/.cpan/sources/modules/02packages.details.txt.gz'
Database was generated on Fri, 06 Nov 2015 15:29:02 GMT
..............
New CPAN.pm version (v2.10) available.
[Currently running version is v2.05]
You might want to try
install CPAN
reload cpan
to both upgrade CPAN.pm and run the new version without leaving
the current session.
..............................................................DONE
Fetching with LWP:
http://www.cpan.org/modules/03modlist.data.gz
Reading '/root/.cpan/sources/modules/03modlist.data.gz'
DONE
Writing /root/.cpan/Metadata
Running install for module 'SOAP::ISIWoK'
Fetching with LWP:
http://www.cpan.org/authors/id/T/TI/TIMBRODY/SOAP-ISIWoK-3.01.tar.gz
Checksum for
/root/.cpan/sources/authors/id/T/TI/TIMBRODY/SOAP-ISIWoK-3.01.tar.gz ok
'YAML' not installed, will not store persistent state
Configuring T/TI/TIMBRODY/SOAP-ISIWoK-3.01.tar.gz with Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for SOAP::ISIWoK
Writing MYMETA.yml and MYMETA.json
TIMBRODY/SOAP-ISIWoK-3.01.tar.gz
/usr/bin/perl Makefile.PL INSTALLDIRS=site -- OK
Running make for T/TI/TIMBRODY/SOAP-ISIWoK-3.01.tar.gz
cp lib/SOAP/ISIWoK.pm blib/lib/SOAP/ISIWoK.pm
cp lib/SOAP/ISIWoK/Lite.pm blib/lib/SOAP/ISIWoK/Lite.pm
Manifying blib/man3/SOAP::ISIWoK.3pm
TIMBRODY/SOAP-ISIWoK-3.01.tar.gz
/usr/bin/make -- OK
Running make test
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM"
"-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0,
'blib/lib', 'blib/arch')" t/*.t
t/SOAP-ISIWoK.t .. 3/10
# Failed test 'authenticate (soap:Server): The given SOAPAction
http://auth.cxf.wokmws.thomsonreuters.com\#authenticate does not match
an operation.'
# at t/SOAP-ISIWoK.t line 34.
# Failed test 'search (soap:Server): The given SOAPAction
http://woksearch.v3.wokmws.thomsonreuters.com\#search does not match an
operation.'
# at t/SOAP-ISIWoK.t line 38.
# Failed test 'search with opts (soap:Server): The given SOAPAction
http://woksearch.v3.wokmws.thomsonreuters.com\#search does not match an
operation.'
# at t/SOAP-ISIWoK.t line 50.
t/SOAP-ISIWoK.t .. 6/10
# Failed test 'retrieve (soap:Client): Unmarshalling Error:
cvc-elt.3.1: Attribute 'http://www.w3.org/2001/XMLSchema-instance,nil'
must not appear on element 'queryId', because the {nillable} property of
'queryId' is false. '
# at t/SOAP-ISIWoK.t line 62.
# Failed test 'missing record id'
# at t/SOAP-ISIWoK.t line 63.
# Failed test 'retrieveById (soap:Server): The given SOAPAction
http://woksearch.v3.wokmws.thomsonreuters.com\#retrieveById does not
match an operation.'
# at t/SOAP-ISIWoK.t line 74.
# Failed test 'citedReferences (soap:Server): The given SOAPAction
http://woksearch.v3.wokmws.thomsonreuters.com\#citedReferences does not
match an operation.'
# at t/SOAP-ISIWoK.t line 79.
# Looks like you failed 7 tests of 10.
t/SOAP-ISIWoK.t .. Dubious, test returned 7 (wstat 1792, 0x700)
Failed 7/10 subtests
Test Summary Report
-------------------
t/SOAP-ISIWoK.t (Wstat: 1792 Tests: 10 Failed: 7)
Failed tests: 3-9
Non-zero exit status: 7
Files=1, Tests=10, 3 wallclock secs ( 0.05 usr 0.01 sys + 0.44 cusr
0.03 csys = 0.53 CPU)
Result: FAIL
Failed 1/1 test programs. 7/10 subtests failed.
Makefile:827: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 7
TIMBRODY/SOAP-ISIWoK-3.01.tar.gz
/usr/bin/make test -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
reports TIMBRODY/SOAP-ISIWoK-3.01.tar.gz
Running make install
Installing /usr/local/share/perl/5.20.2/SOAP/ISIWoK.pm
Installing /usr/local/share/perl/5.20.2/SOAP/ISIWoK/Lite.pm
Installing /usr/local/man/man3/SOAP::ISIWoK.3pm
Appending installation info to
/usr/local/lib/x86_64-linux-gnu/perl/5.20.2/perllocal.pod
TIMBRODY/SOAP-ISIWoK-3.01.tar.gz
/usr/bin/make install -- OK
Any help would be more than welcome.
Thanks again for your answers,
George
On 05/11/2015 05:52 μμ, martin.braendle at id.uzh.ch wrote:
>
> It might be that the version detection for SOAP::ISIWoK is a little
> bit too sharp. Try changing line 27 of
> perl_lib/EPrints/Plugin/Import/ISIWoK.pm to
>
> if( !EPrints::Utils::require_if_exists( "SOAP::ISIWoK", "3" ) )
>
> Best regards,
>
> Martin
>
> --
> Dr. Martin Brändle
> Zentrale Informatik
> Universität Zürich
> Stampfenbachstr. 73
> CH-8006 Zürich
>
> Inactive hide details for George Mamalakis ---05/11/2015
> 16:46:30---Hello everybody, I tried to enable the ISI-WoK plugin on
> myGeorge Mamalakis ---05/11/2015 16:46:30---Hello everybody, I tried
> to enable the ISI-WoK plugin on my EPrints installation (3.3.14,
>
> Von: George Mamalakis <mamalos at eng.auth.gr>
> An: eprints-tech at ecs.soton.ac.uk
> Datum: 05/11/2015 16:46
> Betreff: [EP-tech] ISI WoK plugin configuration
> Gesendet von: eprints-tech-bounces at ecs.soton.ac.uk
>
> ------------------------------------------------------------------------
>
>
>
> Hello everybody,
>
> I tried to enable the ISI-WoK plugin on my EPrints installation (3.3.14,
> Debian). After installing the required perl libraries, the import plugin
> becomes accessible from the drop-down menu, but when I try to run a
> query I am getting the following error:
>
> Unhandled exception in Import::ISIWoK: Plugin returned undef
>
> I assume that this is probably because I haven't done any configuration
> (eg. a valid username, password combination) at any moment. So, how
> should I configure it to run correctly (is there a guide or anything)?
>
> Thanks all in advance!
>
> George
>
> --
> George Mamalakis
>
> IT and Security Officer,
> Electrical and Computer Engineer (Aristotle Univ. of Thessaloniki),
> PhD (Aristotle Univ. of Thessaloniki),
> MSc (Imperial College of London)
>
> School of Electrical and Computer Engineering
> Aristotle University of Thessaloniki
>
> phone number : +30 (2310) 994379
>
>
> *** Options: http://mailman.ecs.soton.ac.uk/mailman/listinfo/eprints-tech
> *** Archive: http://www.eprints.org/tech.php/
> *** EPrints community wiki: http://wiki.eprints.org/
> *** EPrints developers Forum: http://forum.eprints.org/
>
>
>
> *** Options: http://mailman.ecs.soton.ac.uk/mailman/listinfo/eprints-tech
> *** Archive: http://www.eprints.org/tech.php/
> *** EPrints community wiki: http://wiki.eprints.org/
> *** EPrints developers Forum: http://forum.eprints.org/
--
George Mamalakis
IT and Security Officer,
Electrical and Computer Engineer (Aristotle Univ. of Thessaloniki),
PhD (Aristotle Univ. of Thessaloniki),
MSc (Imperial College of London)
School of Electrical and Computer Engineering
Aristotle University of Thessaloniki
phone number : +30 (2310) 994379
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.ecs.soton.ac.uk/pipermail/eprints-tech/attachments/20151106/fac6b3c4/attachment-0001.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 105 bytes
Desc: not available
Url : http://mailman.ecs.soton.ac.uk/pipermail/eprints-tech/attachments/20151106/fac6b3c4/attachment-0001.gif
More information about the Eprints-tech
mailing list